Used in fire brigades, factories, mines, enterprises and docks, etc., to extinguish large-scale oil fires
| Overall dimensions | 11660 × 2540 × 3770 mm |
| Total mass | 38000 kg |
| Liquid capacity | 11700 kg of water for foam, 6400 kg of foam |
| Maximum speed | 95 km/h |
| Rated flow of fire pump | 80 L/s at 1.0 MPa |
| Rated flow of fire cannon | 64 L/s at 1.0 MPa |
| Range of fire cannon | Foam ≥ 70m, Water ≥ 75m |
| Specific power | 426/38 = 11.21 |
| Approach angle / Departure angle | 17° / 11° |
Model: Arocs 4158E6 8×4 Class II
Manufacturer: Daimler Trucks AG
Drive type: 8×4
Axle spacing: 1750 + 4600 + 1350 mm
| Type | |||
|---|---|---|---|
| Vehicle body length | |||
| Vehicle type | When the maximum frame rear suspension is engaged | 0 mm | |
| Drive mode | 8x4/4 | The minimum value of the center of gravity to the final axle | ./. mm |
| Wheelbase | 4250 mm | The maximum value of the center of gravity to the final axle | ./. mm |
| Weight | |||
| 1. Front axle (empty) | 3431 kg | ||
| 2. Front axle (empty) | 3435 kg | ||
| 1. Rear axle (empty) | 1876 kg | ||
| 2. Rear axle (empty) | 1876 kg | ||
| Size | |||
| Total weight (including SA) | 10618 kg | Frame height – Front axle – Loaded | 1 mm |
| Load | 30382 kg | Frame height – Front axle – Empty | 1 mm |
| Total vehicle weight (GVW) | 41000 kg | Frame height – Rear axle – Loaded | 1 mm |
| Combined total weight (GCW) | 40000 kg | Frame height – Rear axle – Empty | 1 mm |
| Transmission | |||
| Transmission | G 330-12/11.63-0.7 | Type | G2F |
| Engine | |||
| Engine | M3P | Tire | 315/80 R 22,5 |
| Displacement (cc) | 15569 | ||
| Engine output power (kW / HP) | 425 / 578 | ||
| Power / Engine torque (Nm) | 2800 | ||
The front part of the compartment is equipped with a standing crew cabin, which can accommodate 7 firefighters in combat readiness.
The two side doors are equipped with glass sliding windows.
The crew cabin is equipped with a standing air conditioning system and has a convenient ladder and handrails for firefighters to get on and off. The handrails are made of metal and have anti-slip patterns, capable of withstanding a force of 100 kilograms.
The walls and the roof
The floor of the crew cabin is covered with a carpet made of flame-retardant material, which complies with environmental protection requirements, and can reduce noise, prevent slipping, and facilitate cleaning.
The overall interior decoration of the crew cabin is equipped with an LED lighting system, and the top is equipped with a dual-mode air conditioning system.
There are 7 single seats, and the backrests of the seats are embedded with 4 sets of universal adjustable air respirator brackets, and air respirators are embedded inside.
The air respirators have mechanical locking mechanisms to lock them in place.
| Model | 8FC (Hill, USA) |
| Fire pump flow rate | 166L/s @ 1.0MPa |
| Installation form | Rear-mounted |
| Drive form | Driven by the car engine through a transfer case |
| Sealing | Mechanical seal |
| Maximum suction depth | ≥ 7 meters |
| Vacuum pump | Hill ESP (DC 24V), of the same brand as the pump |
| Drain time | ≤ 100 seconds |
Fire cannon manufacturer: United States TFT
| Flow rate | 150L/S at 1.0Mpa |
| Range | Water ≥ 90 meters |
| Panning angle | -45° to +90° |
| Horizontal angle | 360° |
| Installation position | Top of the vehicle |
| Control method | Wired + Wireless remote control |
Copyright © Hubei Yuantai Special Automobile Co., Ltd All Rights Reserved | Sitemap
Spain 
English 
